Administrative Programming for Norstar 3x8, 6x16 and 8x24

If the main system unit (KSU) looks like one of the following, you'll use this set of instructions:
(Show below, left to right: 8x24, 6x16, 3x8)

Once you're in administration mode, the function of some of the buttons on your phone will change, as labeled below.  Once you exit programming mode, the function of the buttons will return to normal.
(Shown below, left to right: M7324, M7310).  You can also use the T7316 to program.

Programming must be done from any M7310, T7316, or M7324 model phone set.

     To Log Into System Programming:
1. Press FEATURE * * 2 6 6 3 4 4
2. Enter Password: 2 6 6 3 4 4       Display will read: " A. Configuration"
Using the navigation keys, as displayed below, follow the next simple steps:
3. Press: NEXT        Display will read: "B. General Admin"
4. Press: SHOW       Display will read: "1. Sys speed dial"
5. Press: NEXT         Display will read: "2. Names"
6. Press: NEXT         Display will read: "3. Time and date"
7. Press: SHOW        Display will read: "Time # # : # #" (Your current setting.

     To Change the Time:
1. Press the CHANGE softkey     Display will read: "Hour:
2. Press the CHANGE softkey         Display will read: "Hour: _ "
3. Enter the new HOUR. (in 24-hour format - Ex.: 5:00pm = 17:00.     Display will then read the new Hour programmed.
4. Press NEXT     Display will read: "Minutes: # # "
5. Press the CHANGE softkey       Display will read: "Minutes": _ "
6. Enter the new MINUTES.

     To Change the Date:
1. Press NEXT      Display will read: "Date DD MM YY"
2. Press the CHANGE softkey     Display will read: "Year: # # "
3. Press the CHANGE softkey, (If the year is incorrect)     Display will read: "Year: _ "
4. Enter the new YEAR        Display will then read the new Year programmed.
5. Press NEXT       Display will read: "Month: # # "
6. Press the CHANGE softkey, (If the month is incorrect)      Display will read: "Month: _ "
7. Enter the new MONTH      Display will then read the new Month programmed
8. Press NEXT     Display will read: "Month: # # "
9. Press the CHANGE softkey, (If the day is incorrect)     Display will read: "Day: _ "
10. Enter the new DAY     Display will then read the new Day programmed

Programming System Speed Dials

Follow steps 1-3 under "Log Into System Features"

4. Press: SHOW    Display will read: "1. Sys speed dial"
5. Press: SHOW     Display will read: "Speed Dial #:___"  HINT: Begin your system Speed Dials with "01"
6. Enter: 01 or 02 or 03 etc...      Display will read: "Speed dial #:01"
7. Press: SHOW     Display will read: "No number stored"
8. Press the "CHANGE" softkey.     Display will read: "#01:
9. Enter the Speed Dial number
10. Press the "OK" softkey.
11. Press: NEXT     Display will read: "Use prime line"
12. Press: NEXT     Display will read: "Display digits:Y"
13. Press: NEXT     Display will read: "Bypass restr'n:N"
14. Press: NEXT     Speed dial 01 has now been programmed:

To program another Speed Dial Number, repeat steps 6 thru 14.

     Changing a name on a phone
Follow steps 1-3 under "Log Into System Features"
4. Press: SHOW     Display will read: "1. Sys speed dial"
5. Press: NEXT      Display will read: "2. Names"
6. Press the SHOW     Display will read: "Set names"
7. Press: SHOW     Display will read: "Show set:__"
8. Enter the extension number of which you wish to change the name     Display will read: "<##:name>"
9. Press the CHANGE softkey
10. Using the dial pad spell out the name    Ex: If you need the letter K press the 5 key twice and then press # to confirm the letter. Continue until the entire first name is spelled. (note: you are limited to 7 characters)
11. Press: NEXT (if you fail to do this step, the name will not be saved!!!)
12. Press the RLS key